The temperature of the open gears and the amount of oil used have decreased simultaneously. This lubricant is simply amazing!
2025-12-08181
Heavy-duty equipment such as mining mills and rotary kilns operate under high-intensity conditions throughout the year. Open-type gears have high-temperature warnings and excessive lubrication and fuel consumption have become common problems in the industry. The equipment frequently stops due to high temperatures, resulting in daily losses of tens of thousands of yuan in output value. The repeated addition of lubricants not only increases costs but also, for large equipment, excessively high temperatures not only affect the lifespan of open-type gears but also cause thermal expansion of bearings, affecting the operational accuracy. When such a situation occurs on the mill, continuous "high fever" may even trigger its alarm mechanism, and every minute of delay thereafter is a real loss of money for the production enterprise.
Zhongke Runmei has been deeply engaged in the field of special lubrication for many years. Through product research and development iterations and on-site verification, it has launched the "Lubemater OG-90 CSF series of products, the fifth-generation open-type gear lubrication new benchmark". This new generation of special lubricant achieves "dual reduction" of tooth surface temperature and lubricating oil consumption with its innovative formula. A mining customer achieved remarkable results after using it for half a month, truly achieving a double harvest of cost reduction and efficiency improvement!
The actual data speaks for itself: "Double reduction" breakthrough was achieved within half a month
The tooth surface temperature has dropped by 13-20 degrees Celsius, and the high-temperature alarm is a thing of the past.
For the semi-autogenous grinding machine equipment of a large-scale mine, the highest temperature on the tooth surface of the left small gear reached 66.9℃, while the lowest temperature was 55.6℃. The temperature difference exceeded 10.0℃, causing frequent equipment alarms and shutdowns.
After switching to the Lubemater OG-90 CSF series products in September 2025, the temperature gradually dropped within 24 hours, and stabilized within the range of 42-43℃ within 5 days, with a temperature difference of less than 1℃.
From the temperature trend graph, it can be seen that after the switch, the surface temperature of the teeth dropped rapidly and remained stable, completely getting rid of the problem of high temperature. The equipment startup rate increased by 12%.
The amount of lubricating oil used has sharply decreased, and the spraying interval has been extended by nearly twice.
Through on-site tracking and optimization by the Zhongke Runme technical team, the highly efficient lubrication characteristics of the OG-90 CSF product were fully realized:
The spraying interval was gradually extended from 6 minutes before the switch to 15 minutes. The extension ratio exceeded 120%, and the oil consumption was reduced by 50%.
By calculating the overall oil cost, we can reduce the oil expenses by over 15% annually.
Core Strengths Overview: 6 Key Features Powering the "Double Reduction" Efforts
Ultra-high viscosity-temperature index: Maintains a stable oil film at high temperatures, enhances load-bearing capacity, and effectively resists heavy-load impacts;
Ultra-low friction coefficient: The frictional resistance between gears is significantly reduced, which not only helps to prevent fatigue damage but also contributes to energy conservation and cost reduction.
Outstanding low-temperature adaptability: In low-temperature environments, no diluent is required and the fluid can be smoothly pumped directly, suitable for all-weather operations.
Instant lubrication performance: An effective oil film is formed immediately upon startup, eliminating the need for preheating, thereby reducing the equipment startup time.
Transparent visual appearance: Facilitates inspectors to visually observe the lubrication status of the gear surface, enabling them to promptly identify potential problems;
Long-lasting anti-wear protection: The oil film has strong adhesion and the anti-abrasion grade reaches 12. This significantly extends the service life of gears by over 50%.
Industry Adaptation & Cooperation Invitation
Help to upgrade production efficiency and optimize operating costs
Lubemater OG-90 CSF is suitable for various open gear transmission equipment such as mining ball mills, semi-autogenous mills, and cement rotary kilns. It can perform stably under high-temperature, high-load, and dusty working conditions.
If your enterprise is facing problems such as high-temperature alarms from gears, excessive lubrication consumption, and frequent equipment maintenance, you might want to give this "double reduction" lubricant a try. We offer professional on-site technical support, free condition assessment and selection guidance to help you upgrade production efficiency and optimize operating costs.
