Lubemater MH-45 Cutting Fluid
Lubemater MH-45 cutting fluid is a microemulsion cutting fluid refined from high-quality base oil, anti-wear agents, anti-corrosion and anti-rust agents, bactericides and other additives.
It is widely used in the processing of ferrous metals and is suitable for lathes, milling machines, machining centers, etc. The recommended concentration is 5%, and it can be adjusted within the range of 5-10% according to actual conditions. Just mix it with ordinary tap water. Pour the concentrate into the water and stir evenly. Do not reverse the order.
18kg plastic barrel; 180kg iron barrel
Core Advantage
It does not contain phenol, nitrite, and other substances, which is safe and environmentally friendly, and has no irritating effect on the skin; It has excellent lubricity and extreme pressure, and can ensure good cooling and wettability during high-speed cutting; Low foam performance, good antibacterial properties, long service life of working liquid; It can effectively prevent the corrosion and rust of ferrous metals.
Product Data
| Properties | Typical technical Parameters | Test standard |
| pH（5%，pure water） | 9.7 | JB/T 7453 |
| Corrosion Test（cast iron/carbon steel；55±2℃） | Qualified | GB/T 6144 |
| Rust Prevention Test（single chip/lamination；20±2℃） | Qualified | GB/T 6144 |
| Antifoam Performance（10 min），mL | 0 | GB/T 6144 |